If you buy something through a link in our posts, we may get a small share of the sale.
Frustrated with your car’s poor fuel economy and engine problems? Well, it might just be the right time for you to get an Oil catch can!
There is a lot going on in the internal combustion engine of your vehicle. One of which is the build-up of pressure in the crankcase.
As the pistons inside the engines move continuously, they exert a huge volume of air in and out. Blow-by is formed due to this buildup of pressure.
In the crankcase of the engine, this pressure starts to increase rapidly. If that pressure is not released, it will cause a lot of harm to the engines.
This pressure needs to escape. The gas that creates this pressure is a mixture of air, oil, and other contaminants.
In older cars, there is a tube pointed downwards which expels the oil and gases. This is the reason why you will see small puddles of oil on the roads.
Catch cans work by collecting contaminants which would otherwise form carbon deposits in the intake valves. By installing an oil catch can, you will increase the longevity of the engines by keeping it from being damaged!
In this article, we will try to find the best oil catch can for your particular needs and vehicle model. Let’s get started.
Benefits of Using Oil Catch Can
If you own a modded vehicle that has an internal combustion engine, then installing a catch tank will keep your vehicle free from engine related issues, and frequent repairs.
An oil catch can in your vehicle favors your car in two ways.
1. Prevent Sludge And Carbon Deposits From Forming
Accumulation of residual carbon and sludge creates issues in your vehicle’s engine and intake system. The impurities from the blow-by air tend to build up on turbochargers, intake manifold, piping, and other parts.
The device allows you to capture the oil contaminant from the pressurized air. The air will then travel to your car’s intake manifold and so, no deposits form on your intake valve.
2. Increases Engine Performance
The buildup of deposits may heavily reduce the power produced by the engines. Issues such as knocking, pre-ignition, and low fuel economy occur due to clogging of the injectors. An oil catch can prevent these problems to occur and increase the performance of your car.
Top 8 Best Oil Catch Can Reviews In 2021
Ruien 0046 Polish Baffled Universal Aluminum Oil Catch Can
The Ruien 0046 is a light and inexpensive catch can that is reliable and will last a long time. It is made using aluminum and gets the job done. The moisture and dirty oil found on the blow-by gas will be collected in this tank.
It is a great option that will help increase the longevity of your engine as well as the intake system. Using the Ruien 0046, you will also notice a slight increase in performance.
With the Ruien 0046, you don’t have to worry about driving your car through rough terrain. In difficult conditions, you can easily rely on the catch tank to protect your vehicle.
The package the tank comes in includes all the necessary hardware you need to get started. This includes mounting clamps, hoses, the tank itself, and more.
If you are on a budget, this is the best catch can you can buy. The Ruien 0046 can be fitted in most vehicles.
Installing the tank is very simple, and shouldn’t take more than 5-10 minutes to complete. However, leaving the installation to the experts will be a better idea.
- Lightweight and will last a long time.
- Effectively collects any dirty oil on blow-by gas.
- Increase the performance of your engine.
- It comes with all the necessary components.
- Installation does not take much time.
- 100% brand new oil catch tank can.
- The oil catch tank is made of aluminum, will be light weight, long lasting!
- The size and color of the oil catch tank:as the pictures show
Vincos Universal 3/8″&9/16″ 400ml Aluminum Oil Catch Can
If you are on a budget, the Vincos Universal Oil Catch Can is a great option!
The catch tank is made using high-grade aluminum that adds strength and increases durability. It will give you the finest performance out of your car.
The Vincos universal tank saves your engines by keeping it clean from dirt. It also helps to keep them running at the top performance. The premium-grade tank captures oil and moisture from the blow-by gas. It prevents sludge and carbon build-up in the engines and the intake system.
The TIG-welded tank has an O-ring gasket that prevents any oil from leaking. It is very easy to clean. All you have to do is unscrew the bottom of the tank, and most of the device becomes simple to reach for cleaning.
You can install the tank in two different ways. As the tank comes with an air filter, it allows you to apply the tank as a vented system. The tank consists of a stainless steel screw-on breather along with a hose clamp.
This allows for an easy installation. The clamps keep the can secured, so it doesn’t go loose during vibration.
- Build using high-grade aluminum.
- O-ring gasket prevents oil from leaking.
- Installation is simple and can be done quickly.
- Clamps keep the catch can secured.
- The device is easy to open and clean.
- ✔ 【BILLET AEROSPACE 6061 ALUMINUM】Made of High Quality Aluminum for Enhanced Strength and...
- ✔ 【INCREASES HORSEPOWER & PRESERVE ENGINE LIFE & KEEP ENGINE CLEAN】This oil catch tank catch...
- ✔ 【PREVENTS OIL LEAKAGE】Fully Tig Welded and Thread Come with O-ring Gasket to Prevents oil...
ESPEEDER Universal Aluminum Car Truck Engine Oil Catch Can
Want a compact catch can for your vehicle? Then the Espeeder Catch Can will be the perfect choice for you.
The Espeeder is made with sturdy aircraft aluminum alloy. This makes the tank durable and also makes it look sleek. It is small in size and can easily fit in most tight spaces.
The Espeeder can hold a good amount of oil. You can easily drive for miles without having to worry about removing the contaminated oil from the catch can.
Inside the tank, you will find a baffle that efficiently divides the contaminants and moisture. The device captures almost all of the sludge and dirt so that it doesn’t build up on the intake pipes or other components that make up the engine.
The Espeeder oil catch tank consists of an O-ring gasket, which stops the oil from leaking from the can. You can install the device using hose clamps that keep the can from vibrating. It is also possible to use zip ties to hold the device.
The catch can has a built-in dipstick that allows you to monitor the fluid levels. You can remove the bottom of the can if you want to clean it.
- Made with sturdy aircraft aluminum alloy.
- Holds a decent capacity of oil.
- O-ring gasket stops the oil from leaking.
- It contains a dipstick that allows you to monitor fluid levels.
- Prevents the buildup of dirt and other contaminants.
- 100% Brand New.Note:The hose come with is just a gift for free.It's not a vacuum hose and can't...
- Made of High Quality T-6061 Aluminum for Enhanced Strength and Durability,Anodized Finish Body...
- Internal Baffle DUAL Chamber Filter Provide an Excellent Performance in Catching Air and Moisture
Dewhel Universal Cylindrical Catch Can
A high-performance catch can for a fantastic price!
The Dewhel Universal Cylindrical reservoir is bigger than your average oil catch tanks. With a capacity of 750ml, you don’t have to worry about maxing the tank.
The device is made using high-quality aluminum that is light and durable. Even with the larger capacity, the device can be installed in most cars with ease.
It prevents the building up of dirt and sludge on your vehicle’s engine components, which can cause damage and decrease in performance. By fitting this device, you don’t have to worry about decreasing combustion temperatures.
The device is quick and easy to install. It comes with brackets for mounting, fittings, hoses, and other hardware. The universal design of the oil catch tank allows you to install it in most vehicles. It is also very easy to open.
If you are looking for the best oil catch can that has high storage capacity and improves the performance of your vehicle’s engine, then this device is worth purchasing.
- Large tank capacity of 750ml.
- Quick and easy to install.
- Universal design allows you to install in most vehicles.
- Great build quality makes it durable.
- Easy to open and clean.
- High Performance Racing turbo Oil Catch Tank Can Made Of Light Weight High Quality Aluminum.
- Drain Hole Diameter is M12,Thread is 1.5
- Universal Round Oil Line Catch Cans fit for most car
Evil Energy Baffled Universal Oil Catch Can
Evil Energy is one of those manufacturers that you can easily rely on.
The Evil Energy Baffled Universal Oil Catch Can they manufacture is made using aluminum alloy. This makes the device durable and also adds a style in your engine bay as it has an anodized finish.
As for performance, you won’t be disappointed. If you look at the engine bay of some performance vehicles, you will likely find an Evil Energy catch can.
The device is designed to be compatible with most vehicles. It has an O-ring seal gasket that stops oil from leaking.
The device is made to effectively remove the harmful contaminants from the pressurized blow-by gases. The baffling system located inside the tank cools oil vapor, then converts it into liquid. This increases the longevity of the engine as there no deposits that will form on the intake valves.
The tank comes with a dipstick, which lets you see the volume of the oil collected. The container is quite easy to remove.
This makes draining the liquid and cleaning easier. The kit comes with all the components required for mounting. It also comes with an NBR ⅜” fuel line.
If you want to avoid engine issues such as knocking, consider buying this fantastic device!
- Effective at collecting oil contaminants.
- O-ring gasket stops oil from leaking.
- Catch can is compatible with most devices.
- Made with aluminum alloy and has an anodized finish.
- It comes with all the necessary hardware required for mounting.
- Baffled: Baffled oil catch can could cool hot oil vapor and turn into liquid and catching the oil...
- Universal and Reusable: it can be applied to most cars,making sure there's enough room for...
- Hose Improvement:we updated the fuel hose to NBR and put some steel wool as a gift that you can add...
Sporacingrts Compact Black Baffled 3-Port Oil Catch Can
The Sporacingrts Catch Can is a compact and effective catch can for those who have limited engine bay space. It works by collecting the oil, which then keeps the deposits from forming on the intakes. The baffling system inside the can effectively capture the dirt and sludge from the PCV/CCV air.
The catch can come with a drain valve. You don’t have to unlatch the device from your engine bay. When the tank gets full of oil, simply unscrew the valve and get rid of the contents.
The tank is made using great quality aluminum. Also, the anodized surface gives the tank a sleek look. The material makes the tank durable, and resistant to high temperatures.
It is also resistant to corrosion so you don’t have to worry about it getting damaged very easily.
It has a capacity of 150ml. You don’t have to worry about draining the can frequently.
The device comes with a mounting bracket, which allows you to mount it from different angles. The package comes with all the mounting hardware required for installation.
- It has a capacity of 150ml.
- Effectively captures contaminants from the PCV/CCV air.
- It comes with a drainage valve.
- Made using good grade aluminum.
- Mounting angles allow you to mount from different angles.
- 🔵 Capture Oil & Keep engine clean -----The baffle system in the tank could Catch the oil and...
- 🔵 Reusable Constantly with Drain Valve ----- After installing the valve, when it gets too full of...
- 🔵 Premium Quality & Durable ----- Make with High Quality 100% Billet, 6061 Aluminum, Anodized...
Tasan Racing Universal Aluminum Baffled 2 Port Oil Catch Can
Tasan Racing, a reliable brand for aftermarket parts!
The Tasan Racing Universal Aluminum Baffled tank is a superlight catch can option for your vehicle. It is a great device that divides the oil contaminants from the pressurized PCV/CCV air.
By installing this device, you can prevent deposits from forming in your intake valves. This increases the performance of the engines and reduces any issues you may face with the engines.
The sealed can is made from 100% billet aluminum. This makes the device durable and increases its longevity. It can store approximately 150ml of oil.
Inside the can, you will find a 50-micron bronze filter. The filter catches the oil from the air-oil mixture, and also prevents it from going back to the engine. It also consists of an air diverter, keeps the air longer and improves the capturing of the oil.
The small size means the tank is easy to clean. The size of the can also make the tank easy to install as it takes less space in your engine bay.
- It has a capacity of 150ml.
- Made using 100% billet aluminum.
- Consists of a 50-micron bronze filter.
- Improves the performance of your engines.
- It has an air diverter that efficiently captures the oil.
- [WHAT'S THE OIL CATCH CAN FOR] Compact oil catch can was designed to separate oil particles from the...
- [LESS FUEL USED] An internal baffle keeps the collected oil from splashing around under race...
- [PREMIUM ALUMINUM MATERIAL] Polish universal oil catch can is made of lightweight aluminum alloy...
SPEEDWOW Oil Catch Can
Prolong the life of your vehicle’s engine by using SPEEDWOW Oil Catch Can!
The catch can from speed wow ticks has all that you need. The device is made using aluminum, which enhances its durability. It also has a cool anodized finish that gives it a sleek appearance.
In terms of performance, the device does very well. It consists of a baffle system that catches the oil from the PCV/CCV air. Without the dirt accumulating in the intake manifold, misfires and other engine issues are prevented.
The baffle system is removable, which can be easily cleaned. You can add a filter to catch the contaminated oil more efficiently.
The device also comes with an O-ring gasket that stops the dirt or sludge from leaking. It has a dipstick that you can use to monitor the volume of the oil collected.
The device comes bundled with all the tools required for mounting. Installing the device is easy and can be done within minutes. Due to the compact size of the gas can, you can fit it in tight spaces in your engine bay.
- Removable baffle system effectively captures the oil from the air-oil mixture.
- O-ring gasket prevents oil from leaking.
- Anodized aluminum gives the can a sleek look.
- Dipstick allows you to measure the volume of the oil.
- Easy to mount and install.
- Keep Engine Clean: The baffle system in the tank could catch the oil and moisture from PCV/CCV air,...
- Removable baffle that can store additional filter media.Fully Tig Welded and Come with O-ring...
- The hose come with is just a gift for free.It's not a vacuum hose and can't resist high temperature....
Things To Consider Before Buying The Best Oil Catch Can
If you are considering getting an oil catch can for your vehicle, there are a couple of things you must know. Not all the catch can you see are created equally. You may just buy one and it doesn’t work the way you thought it would.
Here are the factors you need to consider before purchasing a catch can.
1. Know What You Are Getting
You have to be extra careful when purchasing catch cans, especially from online marketplaces. Scams in the aftermarket parts world are very common.
One of the biggest scams in purchasing the tank is that there are no filter components inside. They can usually come with a filter that separates the contaminants. Make sure that all the components are mentioned by the supplier on their product page.
Oil reservoirs come at multiple price ranges. The inexpensive one usually doesn’t have a baffle system. They have steel wool that divides the contaminant from the oil-air mixture. A baffle system is generally better at separating the oil.
This is an important factor to consider since it is an aftermarket device. Most catch cans are made with sturdy aluminum alloys, which gives the tank a sleek look. The device comes in various colors, to match the theme of your vehicle. You can select one that stands out or blends in perfectly.
The more features, the better! Apart from the baffle system that filters the oil from the oil-air mix, there are other components that make the device worth purchasing.
This includes a dipstick that allows you to monitor the level of oil that is captured, drain valves that can empty the can without opening the entire thing and so on.
Why Don’t Some Cars Come With Oil Catch Cans?
Oil catch cans are found in most performance cars. The device is usually installed by the owners themselves. This brings a good question. Why don’t manufacturers place oil catch cans on their cars?
Gasoline direct injection or GDI engines have great benefits when an oil catch tank is installed. There is a good reason as to why manufacturers do not place it on their vehicles.
The PCV system of your vehicle functions by drawing the pressure from the crankcase. It also sucks out moisture that has tiny oil particles that are in the intake charge. The oil deposits cause performance loss, reduced combustion, low fuel efficiency, and other engine component problems. The repairs can be expensive.
You will find that a lot of vehicle owners mismanage oil changes. Oftentimes, owners forget when their cars need maintenance. The contaminants are captured from blow-by gases. The deposits form doesn’t cause problems to the vehicle immediately. It is important to know that the damage happens over time.
Also, the manufacturer doesn’t want you to stick to the same car. Many owners eventually change their car and the manufacturers want you to purchase the vehicles from them.
Oil Catch Can Take Care Tips
Oil catch cans are durable devices that don’t require much maintenance. You still have to keep the can clean and get rid of the oil deposits on a regular basis. Here are some tips you can use to increase the longevity of the catch tank:
1. Drain The Tank Frequently
The type and volume of contaminants collected depend on various factors.
It depends on the driving conditions, miles driven, and condition of the climate. The most appropriate time to deplete the oil is after every 500 miles or so. Keep a note of the volume collected so you know when to drain the tank next time.
2. Keep The Can Clean
The engine parts and the outer surfaces usually become soiled with grease and other types of dirt. The oil catch can will too.
The best way to clean the engine and the can is by using a degreaser. This will effectively remove dirt and grease without harming the catch can.
3. Clear Any Clogs That Forms
You want the device to function effectively. Clogs don’t just form on the engine components. They can build up on the catch can as well.
To clear any clogs, simply start the engine and when it is in idle mode, open the drain valve of the can. This will release any vacuum that developed in the can.
A second way to unclog the can is to remove the oil cap. Then you need to open the drain valve. This will allow the air and unclog the catch can.
Frequently Asked Questions
1. Do Oil Catch Cans Actually Work?
Yes, the device actually does prevent contaminants from entering the intake manifold. The pressurized gases from the crankcase enter the can before the intake manifold. This is where tiny droplets of oil are collected.
It is true that not all the contaminants can be collected, and some eventually do enter the intake manifold. The can collects the majority of the oil, which would have coated the intake manifold if not collected.
2. What Is Inside an Oil Catch Can?
A catch can is designed with the baffling on the inside that traps oil and vapor on the bottom side of the reservoir. The baffling system prevents the oil from going back up and then traveling over to your intake.
Some expensive oil catch cans have a micron bronze filter that also prevents the oil or contaminants from going back to the intake. There is also a dipstick so you check the level of contaminants in the oil that you have caught within the catch can
3. Where Should I Mount My Oil Catch Can?
The Oil-air separator is mounted in your vehicle’s engine compartment. The most appropriate place to mount a catch can kit is on the hook that holds the thermostat housing.
The reason why mounting the oil-air separator in this region is a great idea, is because it will allow you to drain the collected oil from the drain valve of the oil-air separator. This region also provides a clear pathway for the hoses to go along with the vents.
4. How Hard Is It to Install an Oil Catch Can?
One of the most notable things about a catch can is that it can be installed very easily. It is a simple modification that comes with great benefits. You don’t have to tune the device after installation. You can get the can installed in as little as 5 minutes.
If you don’t have prior experience in installing the device, then it’s better if you let the experts do it. You need to route the hose in a specific way, and the fittings need to be firmly attached. The use of management tools such as ties may also be required.
5. Oil Catch Can vs Breather Tank
The main purpose of a breather tank is to prevent pressure build-up. By preventing the pressure build-up, a breather tank will promote the engine’s health.
It will also free up a considerable amount of horsepower. It does this by preventing the creation of positive pressure. It allows the pistons and rods inside the engine to move more freely.
This way, the breather allows the engine to work more efficiently. Breather tanks are necessary for high boost/horsepower induction applications.
A catch can simply capture the deposits by cooling the hot and pressurized gas. The gas forms liquid droplets, which are collected in the tank.
6. Who Makes the Oil Catch Can?
There are several manufacturers that make fantastic catch cans. But not all catch cans are created equally. Whatever option you select will work fine. They are all designed to increase the longevity of the engine.
If we had to name any particular catch tank, we’d choose the one from Dewhel. The catch can have all the features you need. Their products are well received by customers and provide satisfying performance.
Installing an Oil catch can give you that race car noises or a massive boost in performance. It is just a simple modification that will increase the longevity of the engines.
It is true that you don’t necessarily need to have this device. Your vehicle can function easily with having an oil catch can. This is the reason car manufacturers don’t include them.
The device simply separates the contaminated oil from the air-oil mixture. The workings of the device might sound pretty simple, but it is very effective. It can also help you avoid costly engine repairs and save you a ton of money.
We hope you get the best oil catch can for your vehicle that will keep your engines running smoothly for years to come. Take care!