Best Cold Air Intake for 5.7 Hemi Charger [2024 Review]

As an Amazon Associate we earn from qualifying purchases.

A cold air intake is essential for your car’s engine for it to function well. For a 5.7 Hemi Charger that delivers 370 horsepower with 60 mph speed, nothing less than an exceptional air intake would work. That’s why this guide brings the top best cold air intake for the 5.7 Hemi charger that can deliver premium performance with grace.

Our Top Best Cold Air Intake For 5.7 Hemi Charger Review

We have tried to incorporate as much information as possible regarding these cold air intakes into this guide. So stay with us, and we’ll help you acquire the greatest cold air intake for your 5.7 Hemi Charger.

Air intakes are pretty versatile unlike other car equipment and hence you can pick your one from a wide range of options that work the same in one or the other way.

K&N Cold Air Intake Kit

This is K&N Cold Air Intake Kit is for your 5.7 Hemi’s classic body design (Dodge Ram 1500, 2500, and 3500). That’s why it tops our recommendation list. It is done to improve both airflow and engine performance.

The best-quality silicone air filter offers better performance and sound. The silicone material has a high tear strength, allowing it to last a long time.

It can also tolerate temperatures in the engine of up to 400 degrees Fahrenheit. It comes with a unique housing that protects the filter from the heat of the engine. To make it work efficiently, a predetermined amount of oil is applied.

It’s made to keep the check engine light off. As a result, after installing it, you won’t have to waste time and effort coding. The step-by-step instructions will walk you through the installation process. It’s possible that the installation will only take an hour.

Don’t be concerned about the product’s quality. It was put through its paces in accordance with ISO 5011 standards and passed with flying colors.

So, if you’re searching for a cold air intake system that outperforms your factory system, this is the one to go with.

They also make an effort to guarantee that the change in air circulation has no impact on the engine detectors, thus they developed their consumption to satisfy ISO 5011 criteria.

The silicone plastic casing has a slightly higher gloss than polyethylene and is more resistant to long-term heat damage.


  • The K&N air intake can withstand very high temperatures.
  • This air intake comes with a custom enclosure.
  • It has ISO 5011 clearance.
  • The durability of this air intake filter is silicone, which acts as a noble component and ensures good performance.


  • Instructions are pretty hard to decipher on the manual, which makes installation difficult.

AirAid 350-210 Intake System with Oiled Filter

If you want to increase your 5.7 Hemi engine’s breathing, the AirAid350-210 cold air intake could be one of the most outstanding solutions on the market. This air intake system boosts performance and torque by allowing your engine to breathe correctly.

This technology was created by AirAid using a fast prototyping machine and a 3-D scanner. So, despite the simplicity of the design, it performs admirably. It’s meant to keep your OE air intake system in place.

As a result, you won’t need to make any changes to the system for it to work. It features a large open-element air inlet with Cold Air Dam panels to ensure that cold air flows freely to your engine.

The system includes washable and reusable quality air filter material. It guarantees that your engine receives appropriately filtered air by providing more filtration. 

It is an oiled filter that is advised if you travel in dusty, dry weather frequently. To guarantee that this air intake system functions as predicted, it is put through testing such as AirAid’s in-house Superflow flow bench and an all-wheel-drive Mustang chassis dynamometer.

It’s not difficult to set up. To put it together, you’ll need some essential hand tools.

Even if you’re hoping to obtain a few more MPGs after installing the cold air intake, you’ll be able to do so. On the other hand, you will notice a significant change in the controller noise on the Hemi 5.7.

If you are looking for more functionality advantages than you receive from this air intake modification for the cost difference, this device is for you. The lifetime warranty, on the other hand, was a plus. There aren’t many producers that can back that up with top-notch craftsmanship.


  • It has superior quality air filter media.
  • These air intakes have a big air inlet that comes with a Cold Air Dam panel.
  • Gives better performance than a regular OE air intake system.
  • Fits perfectly.
  • Comes with ease of installation and user friendly manual.


  • Instructions are pretty perplexing.

K&N 57-1592 Cold Air Intake Kit

It goes without saying that if you’re looking for the most significant cold air intake; you’ll end up at K&N cold air intake kit, making some of the top cold air intake systems on the market. This one from K&N is ideal for keeping impurities out of your engine and ensuring considerably higher performance than the stock air intake box.

The microscopic cotton strands in the air filter protect it against any kind of impurities during cooling.

As a consequence, the machine can deliver the best potential performance. You’ll also notice an improvement in engine sound.

The size of this air filter is a significant advantage. The high-flow air filter is the biggest that will fit in the OE air filter chamber.

As a consequence, you’ll receive about 50% better filtering without changing anything under the hood. It is also big enough to hold a significant amount of dirt. So, before the first cleaning, you can run for roughly 100,000 kilometers.

The openings and mounting points from the OE air intake system are used throughout this system. As a result, no drilling is necessary. With the help of pliers, a screwdriver, and a ratchet set, you can quickly install it.


  • The K&N air intake comes with extensive filters as compared to ordinary systems. It employs the OE air intake chamber that has mounting points and holes.
  • The K&N air intake functions 50% better than a regular OE air intake system.
  • It can clean and remove an enormous amount of nasty particles.
  • Easy installation with an understandable manual.


  • The size of this air filter can be pretty big for some car models.

Mopar Air Intake For 5.7 Hemi Charger

Mopar cold air intake is an air intake system that has been built exclusively for your 5.7 Hemi engine. You’ll notice a significant improvement in engine power and sound after placing this one beneath your hood.

With the help of its specially designed washable blue air filter, this air intake system offers an ideal cold air supply to the engine. The filter is long-lasting and effective at its work. It captures practically all forms of pollutants in the air and feeds only clean, cold air to the engine. As a result, it provides a significant increase in fuel economy.

The most excellent part about this air intake system is that it doesn’t require any hood modifications. It occupies the same amount of area as the factory air intake system. It also uses the same attachment points and holes as the OEM one. So all you have to do now is remove the old one and replace it in its original location.

Easy-to-follow instructions are included in the kit. As a result, installing it will not be difficult. You won’t have any problems installing it even if you don’t know much about mechanics. So, what do you have to lose? Purchase one, place it under your hood and revel in the improved performance.


  • The size of this air intake is appropriate to fit in the OE system.
  • It gives a commendable performance.
  • Comes with ease of installation.
  • Boost the fuel efficiency to a significant margin.
  • The installation is not complex, and hence, one doesn’t require extensive tools to install it.


  • Hard to find the replacement parts.

Genuine Mopar Cold Air Intake System

This Mopar cold air intake system with a dry filter should be at the top of your list if you’re searching for a cold air intake system for your charger 5.7L engine. It’s an excellent air intake system that promises improved performance, power, and sound production.

It includes a dry media air filter that can be cleaned and reused. Only fresh air enters the engine through the cone-shaped blue air filter, which traps impurities. Your motor makes the most of its power with the help of clean and cold air.

It’s designed and engineered to fit into the built-in storage compartment in your vehicle. So don’t be concerned about the fit and finish.

This bolt-on cold air intake system will almost certainly not require any adjustment. As a result, you’ll be able to set it up in as little as 30-40 minutes.

It assures not only speedy installation but also ease of installation. The manual’s instructions and illustrations will assist you in completing the assignment.

 So, if you want to boost your engine’s horsepower and torque, purchase this cold air intake system as soon as possible.


  • Very easy to install because of user friendly guide.
  • The dry air filter of this device is washable.
  • The air intake design allows it to fit easily under the hood without making any custom changes.
  • Delivers excellent performance and looks decent overall.


  • Requires an additional trip for Autozone.

Features To Consider For Buying The Best Cold Air Intake For 5.7 Hemi Charger

How do you determine which cold air intake is ideal for your 5.7 Hemi Charger? What’s the status of your 5.7 Hemi Charger? Or, for that matter, any other engine? Begin your search by learning about the factors that influence a cold air intake system.

Product Unique Feature Drawback Shape
K&N 57-1592 Cold Air Intake Kit   Can clean and remove an enormous amount of nasty particles Can be pretty big for some car models Conical
Air Aid Intake system Superior quality air filter media Instructions are pretty perplexing Conical
K&N Cold Air Intake Kit This air intake comes with a custom enclosure Instructions are hard to decipher Conical
Mopar Cold Air Intake Kit Boost fuel efficiency Hard to find the replacement parts Conical
Genuine Mopar Cold Air intake Delivers excellent performance and looks decent overall Requires an additional trip for autozone Conical


The most important element to consider when selecting a cold air intake system is compatibility. You must double-check that it matches your vehicle’s year, make, and model as defined by the manufacturer.

It is possible to damage your car and its system if you attempt to install an incompatible cold air system kit.

Car cold air intake

Water Influx

The performance of the vehicle is harmed when water enters the air intake system. It’s also feasible that it’ll have a negative impact on the system. Check to determine if your car’s air intake system is placed near the bottom of the bumper or if your area has a lot of standing water.

Those details should help you figure out how to keep water out of it.

California Air Resources Board (CARB) Certification

This element has something to do with your state’s laws. Similar legislation may exist in your state. If you don’t, your automobile may be impounded, or you may be fined.

When looking for the best cold air intake system for your car, keep this in mind. It should assist you in determining which one would provide the best update to your vehicle and enhance its effectiveness on the road.


One of the most important parts of an intake system is the air filter. It doesn’t matter if the air intake unit is chilly or warm. The filter prevents dust, dirt, and other particles from entering the combustion chamber of the engine.

Your car will no longer have to worry about low engine power, lower fuel efficiency, or significant damage resulting from it. A unique air filter is included in the best cold air intake for the 5.7 Hemi Charger.


The tubing’s primary function in a cold air intake system is to transport the collected cold air to the engine. The tubing in your cold air intake kit must be of the highest quality with such an essential purpose. Plastic, aluminum, stainless steel, and rubber are the ideal materials for this. Pick a product that has tubing made of one of these materials.

Sensor For Mass Flow

The only reason your cold air intake system needs a sensor is to keep track of how much air mass enters the engine. You can tune how much air the engine requires after knowing how much air goes through the intake.

You can improve your car’s performance by doing so. A hot wire and a vane meter are your two significant possibilities for a mass flow sensor on that note.

Thermal Insulation

To get the most out of installing an air intake system, you’ll need a thermal barrier. The engine will be protected from heat pollution by the wall. Search for a cold air intake system with a barrier composed of the best materials available, such as carbon fiber or zirconium.

If you own a Hemi 5.7, you’ll be relieved to learn that it’s intended for cold air intake. However, in this scenario, the cooler the air is, the better! Some air intakes aren’t particularly effective at keeping the air cool.

But on the other hand, specific cold air intakes will use a heat shield as well. This heat shield’s job is to keep the cold air from getting too hot.

When air travels through the filter and housing in the second kind, the air remains colder than in the other intakes. If it aligns with your needs, then it is the one to choose.

Car cold air intake system

Installation Is Simple

If you intend to set up the cold air intake system yourself, be sure it is simple to do so. Any installation difficulty could result in a significant problem. Easy-to-install intakes also save time during the installation process. Keep your eyes on this spot if you want to save time and energy.

Price, reviews, brand, and other factors should all be considered while looking for the best air intake system. Mopar air intake comes with a user-friendly guide that makes the installation hassle-free.

Quality Of The Filter

Another important consideration is the filter quality. Several filters on the market, for example, do not support easy or reuse. If this happens, you’ll have to replace your filter regularly.

As a result, it causes you unneeded stress and costs you a lot. As a result, you should always use a reusable filter with easy-to-clean capabilities.


Disposable filters are frequently used in air filtration systems. As a result, you’ll have to replace these filters often.

The latest air intake technologies, on the other hand, make it possible to reuse filters. As a result, you can select an environmentally beneficial option.

Mounting On The Fender

Another component of your cold air intake system that you might want is the fender mount. It’s a one-of-a-kind approach for cooling the engine’s air. It also allows you to get the most out of your car’s cold air combustion.


These five air intakes are most compatible with your 5.7 Hemi charger. Apart from their slight flaws, the buyers’ responses were highly impressive regarding their delivery.

Hence, you can choose any of the above depending upon your needs and pocket limit. However, if you buy one online, we suggest you check the product thoroughly for any damage during manufacturing or delivery.