As an Amazon Associate we earn from qualifying purchases.
Porcelain is the most preferred material for toilets and other bathroom essentials. It is because of its sanitary properties. If the damage is deep in the toilet bowl area that handles waste, you need to replace it for good.
But, if it is a minor crack or chip, you can consider putting up a repair job. Small and minute cracks or breaks generally happen in the porcelain toilets, and people have questions about whether they are fixable or not. Let’s find the answer!
Can You Fix A Broken Porcelain Toilet?
For a general crack or chip scenario, you can fix the broken porcelain toilet. You need to repair or fix the broken toilet for maintaining the appeal and for safety purposes. As anything with cracks are prone to breakage with a slight force.
But it is always necessary to follow the ideal methods to carry out the repairing task.
If you intend to learn more about “can you fix broken porcelain toilet,” then this article is the right pick for you. Just getting the answer to this question won’t be helpful. Instead, you need to learn about how to approach the same. So, go through the article till the end.
Types Of Cracks That Porcelain Toilets Experience
Toilets comprise different sections that contribute to the usage. And, the damage can be almost anywhere, and you need to find it out before approaching the fixing options. The most common areas of toilet that experience a crack are:
1. Toilet Tank
Toilet tanks might have a chip or a crack right above or below the water level. For example, the cracks can also be either from the inside or from the outside. The plumbers recommend checking for the actual positioning of the crack to determine what type of servicing will be applicable.
A crack that is above water level is not a problem if it isn’t that big. If you spot any sort of cracks, above the water level, within your toilet tank, then it is better to mark and observe them for the time being. In case the crack is worsening, then you need to seek repair for the same!
If the crack is below the water level, then you need to carry out the fixing process right away. In fact, a toilet tank crack below water level is often difficult to spot. But, you need to observe the leakages from the tank.
If you notice any leakage, you need to check the seals connecting the porcelain tank with the toilet bowl. In the next step, you need to carefully check for the cracks within the porcelain tank by clearing out the water. Check both on the inside and outside of the tank.
2. Toilet Bowl
The toilet bowl is the primary area of concern that might cause serious problems. If you observe water over the floor after flushing, there might be a possible crack within the bowl. Cracks within the porcelain toilet bowl are pretty difficult for non-professionals to observe and spot.
Therefore, it is better to check around the porcelain toilet bowl while flushing every time you doubt leakage issues. The toilet bowl cracks can be either above or below the water level, so you need to check it accordingly! Also, there might be minute cracks that are difficult to suppress.
Repair Options For Your Porcelain Toilet
Two possible methods are mentioned below. But, you need to follow the ideal steps for carrying out any of the methods.
1. Fixing Porcelain Toilets With Waterproof Epoxy
First, you need to use the right observation power to locate the porcelain toilet tank or bowl cracks.
Once you have located that, you need to shut off the water supply.
Flush the tank, empty it, and put pressure on the flush handle to eradicate all water from the tank. Now, remove the lid of your toilet tank.
Irrespective of the location of the crack, you have to clean it thoroughly with the use of a bathroom cleaner or any lint-free cloth.
Now, you have to drill through the porcelain with the help of a diamond rotary grinder bit attached to the rotary tool. And drilling should be at the end spot of the crack. Drill entirely through the surface of the porcelain. The hole relieves the pressure upon that crack to ensure that it doesn’t get larger.
Now, you have to widen the crack to give enough space for the epoxy to settle in.
Prepare the epoxy solution or paste, and fill the cracks with it.
Let it dry, and then sand off the excess epoxy coating with the use of 40-grit sandpaper.
After that, you can apply the finishing to the epoxy!
2. Fixing The Porcelain Toilet With Polyurethane Glue
It is an additional pick for building a strong bond between the broken bases of your porcelain toilet. The difference between polyurethane glue and epoxy is that you can apply this glue, even when the toilet is slightly wet. But, you can’t do the same with epoxy. Epoxy, especially waterproof epoxy, can be used if you will be doing a DIY process like resurfacing a porcelain bathtub, and other accessories.
You need to clean the broken area with soap and water to remove dirt and grease to carry out the method. Now, spread the glue over the clean cracks. You need to press the toilet bowl structure or tank from outside to put impact upon the joint. Now, let it dry for 24 hours before you can use it! Check for the leakages then!
Check out this YouTube video link to get a better glimpse of what you should do!
Related Questions
How Did My Toilet Crack?
The major reason for which your toilet might have cracked is any physical impact, or it must have been old enough. To know more about the same, refer to this article that describes three reasons.
Does Super Glue Work Well On Fixing Porcelain?
Yes, super glue is also an ideal alternative for you to repair porcelain cracks. The bonding ability of super glue is proficient and needs less curing time. So, you need to speed up your pace while applying it!
Conclusion
Keep in mind that you need to be careful about fixing the toilet tanks or bowls. It is because when you drill the toilet bowl, you need to focus not to slip the drill machine to make unwanted cracks or damages. Therefore, it is better to go with the drilling process only if you have the tool’s right experience! And rest you can carry out all by yourself!